CS-9707DC, 9709DC, 9711RS PROGRAMMABLE OPTIONS
1. Turn the ignition on.
2. Wait at least (1) second, then press the override/program button the number of times that
corresponds to the feature you want to change. (See the list below) The siren will chirp
once for each button press.
3. Press button #1 or #2 on the transmitter to change the option. The siren will chirp once for
Button #1 or twice for Button #2 to confirm programming.
4. Change each option individually. Repeat these steps as needed.
PROGRAMMING OPTIONS CHART
Option # Option Description
Press Button
#1
Press Button
#2
1
Passive Arming
ON*
OFF
2
Auto Lock with Ignition
ON*
OFF
3
Silent Arm/Disarm (Button1)
ON
OFF*
4
Doors Lock w/Passive Arm
ON*
OFF
5
Lights on with disarm
ON
OFF*
6
Active Re-Arm
ON
OFF*
7
Disarm with Remote Output 1
ON*
OFF
8
Remote Output 2/MAP Switch
MAP
Rem. Out 2*
9
Door Open W arning Delay
8 Sec.*
60 Sec.
10
Vehicle Assignment
VEH #1*
VEH #2
11
Double Unlock Pulse
ON
OFF*
* = Indicates Factory Preset (Default) Vales
________________________________________________________________
REMOTE TRANSMITTER PROGRAMMING
Note: The system can learn up to 4 different
codes max.
1. Have system DISARMED/UNLOCK and Ignition OFF before attempting these steps.
2. Turn Ignition ON and OFF 3 times quickly, leaving it ON the last time. (ON/OFF, ON/OFF,
ON) You should hear (1) short chirp.
3.
Wait at least 2 seconds, then push and release the Program/Override Button once. The
siren should chirp (4) times for confirmation.
The system is now in programming mode.
4. Press the #1 Button (Larger) on transmitter twice. Siren will chirp to confirm code learn on
the second press.
5. Turn off Ignition and wait about 10 seconds before trying the remote. Repeat Steps 2-5 for
another transmitter. The system will learn up to 4 remotes.
