CrimeStopper PARK-PMCU, Руководство по установке

Страница: 14 / 88

14
Front Learning Function
FRONT INSTALLATIONS:
If you have something attached to the front of your vehicle, you will need to “teach” the system to
not look at the object mounted in the front.
To do this:
- Turn the Ignition/Accessory to the ON position
- Press and release the brake pedal 10 times in 10 seconds.
- On the 10th time, hold the pedal down for 6 seconds
- After 6 seconds, you will hear a short alert followed by a long alert
- The learning process has been completed.
To clear the learned setting:
- Turn the Ignition/Accessory to the ON position
- Press and release the brake pedal 12 times in 12 seconds
- On the 12th time, hold the brake pedal down for 8 seconds
- After 8 seconds, you will hear a short alert followed by a second short alert
- The learning process has been cleared.
NOTE: You have 3 minutes to carry out the above procedures from the time you start. If you do not
complete the process in the 3 minutes, turn the Ignition/Accessory OFF and then back ON.
NOTE: If at any time in the process you make a mistake, simply release the foot brake for 3 seconds
and start the procedure over again.