12
TRANSMITTER PROGRAMMING
Note: All transmitter codes must be learned at time of programming!! The LCPRO-3 & LCPRO-4 learns up
to 4 different transmitter codes.
1. Turn Ignition Key to the ON position.
2. Press Programming button 4 times, then after a few seconds the unit flashes the parking lights 4 times.
3. Press Lock button of the first transmitter. You should get 1 light flash confirming the remote is coded, then press
Lock button of a second transmitter, the unit will flash 2 times confirming the remote is coded and so on. If all 4
codes are learned, the unit will automatically exit code learning mode, otherwise turn key off. See diagram
below.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
IGN
OFF
COMPLETE
PRESS LOCK