LCPRO-3 and LCPRO-4
LOW CURRENT
REMOTE START SYSTEM
OPERATING INSTRUCTIONS
CONGRATULATIONS
on your choice of a PRO Start
™ Remote Engine Starter and Keyless Entry by Crimestopper
Security Products Inc.
This system is designed to work on new vehicles with a Canbus computer system. It has a
Data Port for both Smart Phone interface and a Bypass module to interface with the vehicle computer. These
modules are not included; consult your dealer for availability. This booklet contains the information necessary for
operating your system. If any questions arise, contact your installation dealer or Crimestopper Security Products
Inc.
*IMPORTANT INFORMATION: Primary and Optional Features
-PRIMARY:
These are features that must be connected in order for the system to operate properly i.e. Remote
Start connections, Flashing lights, and Brake Reset. For programming, the program button is required.
-OPTIONAL:
These features are to be connected only if desired or agreed upon by the customer and the installing
dealer i.e. Door Locks, Trunk Pop, Dome Light Illumination, Horn-Honk, Anti-Grind, etc. These features may also
require additional parts and/or labor fees. Consult with your installer beforehand to be sure of what is going to be
installed with your particular system.
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
REV A 07-2014
This device complies with FCC Rules part 15. Operation is
subject to the following two conditions: 1) This device may not
cause interference, and (2) this device must accept any
interference that may be received, including interference that
may cause undesired operation. The manufacturer is not
responsible for any radio or TV interference caused by
unauthorized modification to this equipment. Such modification
could void the user's authority to operate the equipment.
