REMOTE ENGINE CONTROL
IDLE DOWN MODE - EXITING THE VEHICLE:
1) With vehicle engine running with key, press the Remote Start button for at least one second. (For EZ-91 model
activate Green remote start input wire.)
2) Parking Lights will turn ON.
3) Doors will unlock, or if brake pedal is being depressed, doors will unlock when it is released.
4) Turn OFF Ignition and remove key. Engine should remain running.
5) Exit vehicle then remote lock doors if desired.
6) Engine will remain running for programmed run time or until you return (whichever comes first).
IGN
SOLID
OFF
UNLOCK
ENTERING A VEHICLE DURING “IDLE-DOWN” or “INFINITY RUN” MODES:
See “Entering Your Remote Started Vehicle” on Last page.
INFINITY RUN MODE (NOT AVAILABLE ON EZ-91 MODEL)
This mode can only be activated when "Idle Down" procedure. The Infinity Run mode allows the vehicle engine to
remain running
INDEFINITELY after the programmed run time elapses
. This mode will allow the vehicle to be left
running and unattended
without
the ignition key in the switch preventing the vehicle from being stolen. This mode
can be beneficial to law enforcement or commercial trucks that need to remain running unattended for long
periods of time. See next page for Infinity mode steps.
5
