4
WIRING
WHITE WIRE: +12Volt PARKING LIGHT (On-Board Relay 10A)
A) For Domestic Cars Signal Circuit: Cut 2 Diodes from White wire. Connect fused White wire to switched
+12V parking light wire at back of light switch. If this is not possible, connect directly to one of the
parking lights at the front of the vehicle.
B) For European vehicles with separate right and left circuits: Use the 2 diodes as shown to separate the
output signal.
RED WIRE: +12V POWER INPUT (15 amp fuse)
Connect to +12 Volt source with supplied fuse & holder. Recommended location for this connection is at the
vehicle battery positive terminal.
POWER DOOR LOCK WIRING
:
DETERMINING DOOR LOCK TYPE:
We recommend determining the type of locking system the vehicle has before connecting any wires. Incorrect
connection may result in damage to the alarm and/or vehicle locking system. Door lock information is
provided as a guide. Your vehicle may differ.
LOCK RELAY: (On-Board Relay)
WHITE/BLACK:
Normally Closed (Terminal 87A On-board Lock Relay)
GREEN:
LOCK Output (Terminal 30 On-board Lock Relay)
VIOLET/BLACK (Fused 10A):
Normally Open (Terminal 87 On-board Lock Relay)
UNLOCK (On-Board Relay):
BROWN:
Normally Closed (Terminal 87A On-board Unlock Relay)
BLUE:
UNLOCK Output (Terminal 30 On-board Unlock Relay)
VIOLET (Fused 10A):
Normally Open (Terminal 87 On-board Unlock Relay)
