background image

 

TURBO TIMER MODE (OPTION #22) 

 

 
The optional Turbo Timer mode allows the CoolStart system to keep a Turbo or Turbo Diesel vehicle running for 1 
to 5 minutes [selectively] after you remove the key and exit the vehicle.  This is handy for turbo cool-down without 
the need for expensive turbo timers.  This mode requires the use of an extra part called a momentary switch/button 
that is not included with the kit.  There are (3) modes of operation for the Turbo Timer Mode 
 

1.

 

Brake Pedal Set Mode

. With the engine running by key,

 press Remote Start Button with brake pedal 

depressed.

 As you release the brake pedal, the Parking Lights and Status LED will blink the number of 

minutes for the Turbo Timer setting. The doors unlock after confirmation. The run time can be changed by 
using the push button switch attached to the green start activation wire (see Always Set Mode). 

2.

 

Always Set Mode (default)

. The Turbo Timer Run Time must always be set. With brake pedal depressed 

and engine running by key, Press the “Turbo Timer” button 1 to 5 times for each minute of run time you 
desire. (1 press = 1 min.) As you release the brake pedal, your system will confirm by flashing the lights the 
same number of times the button was pressed. The doors unlock after confirmation. Turn Ignition switch OFF, 
remove key and exit the vehicle.  

3.

 

Idle Down Mode.

 This replaces the normal Idle Down Mode. Can’t use Infinity Run or Manual Transmission 

Mode with this option. 

With the engine running by key, press the Remote Start Button.

 The Parking Lights 

and  Status  LED  will  blink  the  number  of  minutes  for  the  Turbo  Timer  setting.  The  doors  unlock  after 
confirmation.  The  run  time  can  be  changed  by  using  the  push  button switch attached to the green start 
activation wire (see Always Set Mode). 

 

Note: 

Mode 1 and 3, the run timer (1 to 5 min.) is set one time. The system always remembers the Turbo Timer 

setting even with battery disconnection.

 

 
 
 
 
 
 
 

Содержание Cool Start RS-3


















Отзывы: