Crime Guard 328i3, Руководство по эксплуатации

Страница: 17 / 82

Optional Sensors:
This section explains additional various operations
offered by the addition of an optional sensing device. The Crime Guard 328i
3
security system’s control module features a plug-in port which allows easy
installation of such an optional sensor. A comprehensive line of optional
sensors are available. Options include impact sensors, glass tampering
sensors, pressure wave shock sensors, and microwave/radar sensors which
can detect motion inside and outside the vehicle. Your Crime Guard
dealer
can provide details on the complete line of sensors and help determine which
sensor or sensors are best suited for your needs.
- When a sensor has been added, the system will automatically bypass the
sensor zone if it is triggered five times during a single armed period. If
desired, this feature can be programmed to not operate.
Prewarning Detection Circuit:
If the optional sensor’s prewarn zone is
violated the security system will respond by chirping the siren three times
and relocking all of the doors.* If the prewarn circuit is triggered five times
while the system is armed, the circuit will automatically shutdown until the
security system is disarmed and armed again.
OPTIONAL SENSOR CAPABILITY
To Activate Optional Sensor Remote Bypass:
First Arm the System, then within 4 Seconds Press &
Release the Small Lower Button.
THE SIREN WILL CHIRP TWICE TO
CONFIRM ARMING
THE SIREN THEN CHIRPS ONCE
TO CONFIRM SENSOR BYPASS
THE DOORS WILL LOCK
UPON ARMING*
THE PARKING LIGHTS
WILL FLASH TWICE
TO CONFIRM
ARMING
2
Optional Sensor Remote Bypass: Remote Sensor Bypass allows the
option of “turning off” an optional sensor any- time the system is armed
using the transmitter. When the sensor is bypassed, only the sensor zone is
bypassed and all other protected zones will remain fully operational and
vigilant. The sensor zone will reset to its normal operation the next time the
system arms.
Page 16
1
* An optional doorlock interface must be installed.
BACKUP BATTERY
This security system is equipped with a backup battery inside the control
module. The backup battery will provide an alternative power source to
operate the Crime Guard system if the vehicle's battery is disconnected. A
built-in protection circuit will not allow the backup battery to supply power
into the vehicle's electrical system.
While operating on the backup battery, the system will not have the
flashing lights output, the Status Indicator Light, nor power any sensors in
order to conserve power. The siren will continue to operate at its maximum
sound output, all protected entry zones (besides the sensor) will continue to
be monitored, and the Starter Interrupt will operate while the system is
armed. The backup battery should be replaced by your authorized Crime
Guard dealer every 18 months, or any time the backup battery has operated
the system on its own.
Anticipated life for the backup battery under following conditions:
• 2 days as the system’s only power source while armed.
• 25 activated alarm cycles: An activated cycle has a 30 second duration
during which the siren is sounding. The cycle ends when the system auto-
matically resets itself to the armed state.
• 50 separate arming or disarming commands.
• 18 months if the backup battery circuit has not been used.
2nd & 3rd VEHICLE OPERATION
Up to three systems may be independently operated using a single
transmitter. The transmitter’s button functions can be programmed to be
different for each vehicle. This ability to change the button assignment
prevents arming and disarming the multiple systems simultaneously.
(Refer
to the following chart for button function assignment)
Arm/Disarm Aux Channel #1 Aux Channel #2
Large Button Upper Small Button Lower Small Button
Upper Small Button Large Button Lower Small Button
Lower Small Button Large Button Upper Small Button
Page 17