CribMaster X3 AUGER, Инструкция по установке

Страница: 3 / 4

3 of 4
© 2014 CribMaster. All rights reserved.
Loading the Auger with Small Inserts:
1. Slide the tray out of the machine as described in steps 1 and 2 on page 1.
2. To load the auger, place the insert against the right side of the sleeve above the coil position.
Release the insert and allow the item to slide into place within the coil (see Figure 5) .
3. To load the next item, repeat step # 2 using the next coil position.
4. A quick visual inspection will insure that all inserts have been loaded successfully.
Note: This loading method is recommended over dropping the insert into the Auger. Attempts to
drop the inserts into the auger have been proven unreliable.
5. When the Auger has been loaded push the vending tray back into the machine.
Figure 5