Removal and Replacement of ProStock Drawers
Introduction
1. Introduction
1.1 Purpose
The purpose of the following document will outline the steps to remove a Carousel Drawer from a
ProStock Machine and install a replacement Carousel Drawer or a Locker Drawer in its place.
1.2 Related Documents
•
Calibrating a Carousel in a ProStock
•
Changing an Item in a ProStock Locker
•
Setting Up the ProStock
1.3 Document Conventions
The following conventions for notes, cautions, and warnings will be used within this documentation:
Note:
This will contain general notes related to particular steps or processes within the
documentation.
Caution:
This will contain cautionary notes that need to be followed to avoid risk of injury to
personnel or damage to equipment.
WARNING:
This will contain warnings that need to be followed to avoid risk of significant injury
or death to personnel if not followed.
5 of 13
