Hardware Overview
LEDs
1)
Power Indicator: Steady green when power is on; blinking green when the call is ringing.
2)
Line Keys
Steady green: A conversation is occurring, or a call is in the process of being dialed.
Blinking green: The call is on hold.
Blinking red: The call is ringing.
No light: Idle interface.
Place a call
Three call modes:
1)
Handset: Pick up the handset; enter the number, then press send soft key or press
.
2)
Speaker: Press or the line keys; enter the number, then press send soft key or press .
3)
Headset: Press
; enter the number, then press send soft key or press
.
Note: You can use Contacts or History to dial a number. You can also alternate the mode
during the call.
End a call
To end a call in three different modes:
1)
Handset: Hang up the handset or press the Cancel soft key.
2)
Speaker: Press
, or press the Cancel soft key.
3)
Headset: Press the Cancel soft key.
Answer a call
1)
Handset: Pick up the handset.
2)
Speaker: Press
or press the Answer soft key.
3)
Headset: Press
.
Note: You can also reject the call by pressing the Reject soft key.
Redial
Press
to redial the last number dialed.
Hold
Press
or press the Hold soft key during a call to hold the call.
Press
or Resume soft key to resume the call.
Call Mute
Press
to mute the microphone during a call.
Press
again to un-mute the microphone.
Call Transfer
Blind Transfer
1) Press
or Transfer soft key during the conversation. The call is now on hold.
2) Enter the number that the call is to be transferred to.
3) Press
or the Transfer soft key and now the blind transfer is complete.
Attended Transfer
1) Press
or Transfer soft key during the conversation. The call is now on hold.
2) Enter the number the call is to be transferred to and press the Send soft key or
.
3) When the call is answered, make the introduction, and then press
or Transfer soft key
and the attended transfer is complete.
Semi-Attended Transfer
1) Press
or Transfer soft key during the conversation. The call is now on hold.
2) Enter the number the call is to be transferred to and then press
. [hear ring tone]
3) Press
or the Transfer soft key and the semi-attended transfer is complete.
All manuals and user guides at all-guides.com