CREVIS FnIO S Series NA-9286, Быстрое руководство

Страница: 8 / 8

5. Name of each Part
6. Setting
* Specifications and designs may be changed without advance Notice.
※
Caution
- If you use a hub.
Install the hub in between the master and the first NA-9286.
After connecting the cable to the hub and NA-9286 (In Port), other nodes connected as shown
in the figure above.
- Uses are recommended to use the communication cable for a strong tolerance from the noise.
3
5
5
Status LED Window(refer to the
description below)
RJ-45 Connector (IN)
Latch for DIN Rail
*1
2
Removable Terminal Block
4
RJ-45 Connector (OUT)
Serial Communication Connector
( RS-232)
CREVIS Co., Ltd
29-4, Gigok-ro, Giheung-gu, Yongin-si, Gyeonggi-do, Korea 446-930
TEL : +82-31-899-4599 FAX : +82-31-899-4509
Homepage : www.crevis.co.kr