COATER-MIXER
4
VI
OPERATION
To make a batch of cheese or flavored corn, proceed as follows:
1.
Place two pounds of popcorn or one five-gallon bucket of popcorn into mixer bowl.
2.
Turn on mixer switch. (if supplied with optional timer, turn timer clockwise to
desired time.)
3.
Pour liquid cheese, powder cheese, or flavor mix over popcorn.
i.
(Recommend two cups of liquid cheese melted with one cup of popping oil
mixed together or approximately one cup of dry cheese mix. A small amount
of oil can be sprayed on the corn if there is difficulty with the cheese sticking to
the corn.)
4.
Wait until popcorn is coated evenly then shut off mixer switch.
To make coated nuts or any food product that may require flavor coating:
1.
Place mixing blades over mixing shafts and install retaining clips.
2.
Place nuts or products into mixing bowl.
3.
Turn on mixer switch.
4.
Pour mix over product.
5.
Wait until product is coated evenly then shut off mixer switch.
VII
TROUBLE SHOOTING
1.
If bowl will not turn
(A)
Is machine plugged in?
If Yes
(B)
Is lighted switch “On”?
If Yes
(C)
Make sure Bowl is properly placed on rollers.
(D)
Check output of switch. There should be 120V. for domestic
machines and 230V. for export.
Voltage (No) Replace switch
Voltage (Yes) Check voltage at motor
If yes, replace motor
(E)
Make sure cooling fan is operating. Agitating motor may shut down
and restart if overheats. If fan is not operating:
(F)
Voltage at fan (No) check wiring.
(G)
Voltage at fan (Yes) Replace fan.
Содержание CMT5A
Страница 8: ......
