Make Connections
Make the necessary connections as called out in the illustrations that
follow. Apply power after all connections have been made.
NOTES:
l
When making connections to the ZUMNET-GATEWAY, use Crestron
power supplies for Crestron equipment.
l
The antenna must be attached directly to the antenna connector. It
can be extended with an optional ANT-EXT-10 Antenna Extender
(sold separately).
To supply power using a Crestron PoE injector (sold separately), do the
following.
1. Attach the supplied AC power cord to the IEC 320 connector on the
PoE (Power over Ethernet) injector.
2. Use a CAT5e cable to connect the LAN port of the PoE injector to the
LAN.
3. Use a CAT5e cable to connect the LAN POE port of the PoE injector to
the LAN PoE input port of the ZUMNET-GATEWAY.
4. Insert the other end of the power cord into an active AC outlet.
NOTE:
In the listing of LAN PoE and LAN pins in the following image,
arrows denote internal pin connections.
LAN PoE and LAN Pin Assignments
4
ZUMNET-GATEWAY
Zūm® Net Wireless Gateway for Zūm Lighting Control System
