Wall Mount Kit Crestron
WMK-3200 & WMK-3500
2
••
Wall Mount Kit: WMK-3200 & WMK-3500
Installation Guide - DOC. 5667A
Installation
Complete the following steps in the order provided for proper installation. The only
tools required are a gypsum board saw, a drill with adjustable torque, a #2 Phillips
tip bit, and a 3/16" bit. Refer to the installation diagram for a visual guide.
Installation Diagram
BOTTOM BRACKET
SCREW, #6-32 x 3/16" PAN PHIL
MAGNETIC TAPE
(2 PLACES)
VT-3500L,
CT-3500L, OR
CT-3200L
OVERLAY
SCREW, #6-32 x 1 1/4" FLAT PHIL
(6 PLACES)
TOP BRACKET
(6 PLACES)
STUD, #8-32 x 1 1/4"
(4 PLACES)
BEZEL
1/2" OR 5/8" SHEETROCK
WALL MOUNTING PLATE
NUT, #8-32 HEX
(2 PLACES)
(4 PLACES)
1.
Locate an area on the wall that is clear of studs, wires, and other
obstructions.
2.
Make a small hole near the middle of the designated site; verify
location is suitable.
3.
Fasten the supplied template to the wall; verify that the template is
level.
4.
Use a 3/16" bit to drill eight holes as indicated on the template.
5.
Use a gypsum board saw and cut out and remove the rectangular area
illustrated on the template.
6.
Position the bezel over the opening.
7.
From inside the wall, slide mounting plates over threaded studs and
secure with nuts.
8.
Use a #2 Phillips tip to attach top and bottom brackets to the touchpanel
with six pan head screws. Use 11 in-lbs (1.243 N*m) of torque on the
screws.
9.
Make all necessary connections to the back of the touchpanel.
10.
Position the touchpanel with the attached brackets into the bezel.
Содержание WMK-3200
Страница 1: ......
