background image

Zoom Rooms Devices

To configure the R-Series mobile UC system that utilizes Zoom Rooms
software (UC-FCMX-Z), refer to the instructions below.

Apply Power

Press the power button on the bottom of the UC Engine (attached to the
UC bracket assembly) and apply power to all of the other devices in the
system. The connected display device will show a pairing code.

Remove the USB memory drive (CCS-UCA-MEM-USB) from the Crestron
Mercury device. The USB memory drive does not need to be reconnected
once the device has been powered on. Store the USB memory drive in the
event that it is needed for future troubleshooting.

Log In to the Zoom Rooms Service

Use the Crestron Mercury X device to sign in to the Zoom Rooms service
using an activation code or a Zoom Room Sign-In.

1. Tap Zoom and then tap OK. The device will reboot.

2. Enter the pairing code shown on the display to pair the Crestron

Mercury device with the UC Engine. The Zoom Rooms controller app is
displayed.

3. Log in to the Zoom Rooms service with an activation code or Zoom

Rooms Credentials (email and password).

l

Activation Code:

a. Tap Enter Activation Code.

b. Enter the 16-digit activation code provided by the

administrator to activate the Zoom Rooms room that is
assigned to the activation code. The Zoom Rooms
Conference Room screen is shown on the display.

l

Sign In:

a. Tap Sign In.

b. Enter the Zoom Room credentials and tap Sign In.

c. Select the conference room name from the list and

tap Next. The Zoom Rooms Conference Room screen is
shown on the display.

4. Tap Settings. If a password is required, enter the password (default is

0000). The Settings screen is displayed.

5. Tap Microphone and select the Crestron Mercury device as the source.

6. Tap Speaker and select the Crestron Mercury device as the source.

7. Tap Meet Now to exit.

Configure the System

Connect a USB keyboard and mouse (not included) to a USB port on the
UC Engine to configure system features. Refer to the

Crestron Flex UC

Video Conference Systems Supplemental Guide

(Doc. 8360).

8

UC-FCMX Series

Quick Start

Crestron Flex R-Series Mobile UC Systems

Содержание UC-FCMX Series










Отзывы: