2
•
TST-602: 5.7
˝ Wireless Touch Screen
Supplemental Guide – DOC. 7688A
Configure the TST-602
RF Setup
On the TST-602 Setup screen, tap RF Setup to display the RF Setup screen.
RF Setup Screen
The RF Setup screen shows RF signal strength, gateway UID, and gateway name. It also
has controls for acquiring the TST-602, setting the RF ID, RF channel, and RF power,
enabling RF roaming, and selecting the series of the control system.
Before a TST-602 can be used with a Crestron control system, it must first be acquired by a
Crestron Extended Range (RF) Wireless gateway (sold separately). To acquire a TST-602,
perform the following procedure:
1.
Use a stylus or other thin-tipped object to press ACQUIRE on the gateway to enter
Acquire mode. The accompanying LED illuminates, indicating the unit is ready to
link with the touch screen.
2.
On the TST-602’s RF Setup screen, tap Acquire. The screen displays an “Acquire
in progress” message, and the TST-602 is automatically acquired by the gateway
within two minutes.
3.
When the screen displays an “Acquire OK” message, press ACQUIRE on the
gateway to exit Acquire mode. The LED turns off.
