Crestron TPS-ENETL, Руководство по эксплуатации и установке

Страница: 9 / 32

Crestron TPS-ENETL Ethernet Card for TPS/Lectern Panel
TPS-ENETL Front View
LINK STATUS
LED (GREEN)
ETHERNET
ACTIVITY
LED (YELLOW)
8 1
Industry Compliance
As of the date of manufacture, the TPS-ENETL has been tested and
found to comply with specifications for CE marking and standards per
EMC and Radiocommunications Compliance Labelling (N14176).
NOTE: This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Setup
Installation and Hookup
The TPS-ENETL is designed to be installed in a specific expansion slot
in the TPS-5000L and TPS-6000L touchpanels and the TPS-TPI
touchpanel interface. The tools required for installation are a grounding
strap (or grounded workstation) and a #1 Phillips screwdriver.
CAUTION: The TPS-ENETL and the touchpanel contain electrostatic
sensitive devices (ESDs); observe precautions for handling ESDs to
avoid damaging the card and/or the touchpanel.
Operations & Installation Guide - DOC. 6013 Ethernet Card for TPS/Lectern Panel: TPS-ENETL
•
5