manualshive.com logo in svg

Crestron TPMC-8L, Руководство по эксплуатации и установке, Страница: 44 / 68

Поделиться
Скачать
Crestron TPMC-8L Скачать руководство пользователя страница 44

Isys i/O™ 8.4” Touchpanel Media Center 

 

Crestron 

TPMC-8L

 

Touchpanel Mounting 

Tools Required:  #2 Phillips tip screwdriver 

1.  If the cover plate is attached, use a #2 Phillips screwdriver to loosen and 

remove the four screws and plate. 

2.  Connect all required cables to the touchpanel. Refer to “Hardware Hookup” 

which starts on page 41 for details. 

3.  Insert the touchpanel (without its bezel) into the mounting option and align 

the four screw holes. 

4.  Insert and tighten the four supplied screws (finger tight and then using a #2 

Phillips screwdriver, tighten an additional 1/8-turn). 

5.  Cover the mounted unit with the bezel. Refer to illustration below. 

Exploded View for Mounting the TPMC-8L in the Optional BB-8L Back Box 

TPMC-8L

DRYWALL

BB-8L

TPMC-8L
MOUNTING SCREWS
(4) #04-40 X 2"

 

Touchpanel Removal 

If it is necessary to remove the touchpanel after it has been installed into a mounting 
surface, complete the following steps in the order provided to remove the 
touchpanel. The only tool required is a #2 Phillips tip screwdriver. 

1.  Lift the bezel off the touchpanel. Do not apply excessive pressure to the 

touchscreen. 

2.  Loosen and remove the eight screws that secure touchpanel to the mounting 

option in use. 

3.  Using equal pressure, carefully remove the touchpanel from the opening. 

4.  If necessary, secure and label the attached cables before disconnecting them 

from the back of the touchpanel. 

40  

•

  Isys i/O™ 8.4” Touchpanel Media Center: TPMC-8L 

Operations & Installation Guide – DOC. 6594B 

Содержание TPMC-8L





































































Отзывы:

Нет отзывов