Crestron RMK-3U, Руководство по установке

Страница: 8 / 12

Rack Mount Shelf Crestron RMK-3U, -4U, -5U
Assembly and Installation
Assembly
The Rack Mount Shelf requires assembly prior to installation and use.
Required Tools
•
#1 Phillips screwdriver
Refer to the following illustration and perform the steps below to assemble the unit.
Rack Mount Shelf Assembly
Left Bracket
Right Bracket
Platform
Screw, 6-32x3/8 (Qty 4)
Screw, 8-32x1/2 (Qty 8)
Stop Bracket (Qty 2)
Stop Bracket Forward Position
1. Use a #1 Phillips screwdriver and four 6-32x3/8-inch screws supplied to
attach the two stop brackets on the platform, in the appropriate location for
the chassis that is to be installed (either in the rear position as shown, or in
the forward position indicated).
2. Use the #1 Phillips screwdriver and the eight 8-32x1/2-inch screws supplied
to attach the left and right brackets to the platform.
Installation
Required Tools
•
5/64” Allen wrench
Install the assembled Rack Mount Shelf into a rack prior to placing and securing a
device on the platform. Perform the following steps and refer to the associated
illustration as necessary.
1. Use appropriate rack mounting hardware and tools (not supplied) to install
the Rack Mount Shelf into the rack. Observe standard safety precautions.
2. Place the chassis of the unit being rack mounted in position on the platform
and slide it back against the stop brackets.
4
•
Rack Mount Shelf: RMK-3U, -4U, -5U Installation Guide – DOC. 6475