Crestron QM-FTMC, Руководство по эксплуатации и установке, Страница: 40 / 66

FlipTop Media Center Crestron QM-FTMC
QM-FTMC Basic Controls - Signal Descriptions (continued)
SIGNAL TYPE
AND NAME
DESCRIPTION
Analog input:
<
VidInputSelect >
Selects the video source that will be switched to
the QM output.
Valid analog values range from 0d to 3d as
follows:
0d = No source
1d = COMPUTER (RGB or component on three
channels)
2d = VIDEO (on one channel) and S-VIDEO (on
two channels)
3d = VIDEO (on one channel) and S-VIDEO (on
two channels)
A value of 2d or 3d switches both the VIDEO and
S-VIDEO sources to the QM output.
The final video source selection is completed at
the QM receiver. Here a value of 2d selects
VIDEO; a value of 3d selects S-VIDEO.
Out of range values are ignored.
Analog output:
<
VidInputSelect_F >
Indicates the video source(s) present at the QM
output.
Analog input:
<
AudInputSelect >
Selects the program audio source to be switched
to the QM output.
Valid analog values range from 0d to 3d as
follows:
0d = No source (mute audio)
1d = COMPUTER AUDIO
2d = VIDEO L and R
3d = S-VIDEO L and R
Out of range values are ignored.
Analog output :
<
AudInputSelect-F >
Indicates the audio source present on the stereo
program channel of the QM output.
Analog input:
<
CompForRGB-Aud >
Sets the source gain compensation for the
COMPUTER AUDIO source.
Valid analog values range from -100d (-10dB) to
+100d (+10dB), adjustable in increments of 0.1dB
(1d = 0.1dB).
Analog output:
<
CompForRGB_Aud-F >
Indicates the source gain compensation being
applied to the COMPUTER AUDIO source.
Analog input
<
CompForComposite_Aud >
Sets the source gain compensation for the VIDEO
audio source.
Valid analog values range from -100d (-10dB) to
+100d (+10dB), adjustable in increments of 0.1dB
(1d = 0.1dB).
Analog output:
<
CompForComposite_Aud-F >
Indicates the source gain compensation being
applied to the VIDEO audio source.
Analog input:
<
CompForSVideo-Aud >
Sets the source gain compensation for the S-
VIDEO audio source.
Valid analog values range from -100d (-10dB) to
+100d (+10dB), adjustable in increments of 0.1dB
(1d = 0.1dB).
Analog output:
<
CompForSVideo_Aud-F >
Indicates the source gain compensation being
applied to the S-VIDEO audio source.
NOTE: Use an Analog Initialize to send a decimal input signal to the symbol.
NOTE: Returned values match values that were selected for the < VidInput
Select> and < AudInput Select> inputs.
36
•
FlipTop Media Center: QM-FTMC Operations & Installation Guide - DOC. 6311A