Crestron QM-FTDC, Руководство по эксплуатации и установке, Страница: 43 / 64

Crestron QM-FTDC FlipTop Data Center
combined. No other combinations are valid. That is, two buttons cannot be
combined horizontally; the buttons on rows 2 and 3 cannot be combined.
QM-FTDC Symbol – Detail View of Buttons
QM-FTDC Buttons – Signal Descriptions
SIGNAL TYPE AND NAME DESCRIPTION
Digital Outputs:
Button presses/vertical pair
<
Press1 >, < Press6 >
Button presses/vertical pair
<
Press2 >, < Press7 >
Button presses/vertical pair
<
Press3 >, < Press8 >
Button presses/vertical pair
<
Press4 >, < Press9 >
Button presses/vertical pair
<
Press5 >, < Press10 >
Button presses/vertical pair
<
Press11 >, < Press16 >
Button presses/vertical pair
<
Press12 >, < Press17 >
Button presses/vertical pair
<
Press13 >, < Press18 >
Button presses/vertical pair
<
Press14 >, < Press19 >
Button presses/vertical pair
<
Press15 >, < Press20 >
Indicates that the corresponding button has
been pressed. The signal remains high for the
duration of the button press.
If the FlipTop cover is not fully open the
buttons are disabled and the unit will not
report any button presses, and will release
any button that is already pressed. The status
of the cover is given by the <
FlipTopOpen >
output.
If two buttons are combined to form one larger
button, the same signal should be attached to
both button presses.
High/1 = Button pressed; Low/0 = Button
released
Digital Inputs:
<
fb1 > through < fb20 >
Activates the corresponding LED for as long
as the input is high.
If two buttons are combined, then only the
LED for the top button in the vertical pair will
be visible.
High/1 (level sensitive) = Activate LED
feedback;
Low/0 = Turn off LED
Continued on the following page
Operations & Installation Guide – DOC. 6312A FlipTop Data Center: QM-FTDC
•
39