Crestron MMK-V15 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 20

Crestron MMK-V15 Скачать руководство пользователя страница 16

Mud Mount Kits

Crestron

MMK-V15 & WMKM-V15

NOTE:

Adjustment/mounting plate assembly will have slight play; this is normal. It

allows for minor adjustments to the entire assembly during installation.

Bend Flanges

10. Use four application specific screws (length should not exceed mounting

surface thickness by more than 1/2” (13 mm)) to secure the plate to the
adjustment/mounting plate assembly. The screws pass through the clearance
holes in the mud ring plate and are secured in the extruded holes of the
adjustment plates.

11. Verify that the plate is level before tightening.

NOTE:

Do not overtighten screws. Doing so may damage the plate.

12. Use a #2 Phillips screwdriver and tighten the screws by hand so that they

slightly dimple into the holes in the mud ring plate.

13. Run the necessary cables for the touchpanel and secure them behind the

mounting surface.

12

•

Mud Mount Kits: MMK-V15 & WMKM-V15

Installation Guide – DOC. 6885A

«
...
14
15
16
17
18
...
»

Содержание MMK-V15





















Отзывы:

Нет отзывов