16 • IV-CAMFL-N-W-1B
Product Manual — Doc. 9321A
certified switch that can supply 9 W of power for each connected camera. Alternatively, a PoE
injector can be used to inject power between the switch and camera.
DC Power
Power the camera using 12VDC or PoE, but not simultaneously. The camera cannot operate
properly with less than 12VDC power. Since voltage drops over distance, the supplied 12V 1A
power adapter is not sufficient if the power source is greater than 10 ft (3 m) from the camera.
WARNING: Providing too little or too much power can damage the camera. For PoE, make
sure the network port is configured for 9 W. For DC power, be sure to supply 12V to the
camera.
