Wall Mount
Touchpanels
Crestron Isys
®
TPS-12G/15G-QM-L
pinouts for straight through and crossover RJ-45 cables. Pins 4, 5, 7, and 8
are not used.
RJ-45 Straight Through Cable – For Connection Through Hub
FROM
PIN
COLOR SIGNAL
TO
PIN
SIGNAL
1 White/Orange Tx+
1
Tx+
2
Orange
Tx-
2
Tx-
3 White/Green Rc+
3
Rc+
6
Green
Rc-
6
Rc-
RJ-45 Crossover Cable – For Direct PC Connection
FROM
PIN
COLOR SIGNAL
TO
PIN
SIGNAL
1 White/Orange Rc+
3
Tx+
2
Orange
Rc-
6
Tx-
3 White/Green Tx+
1
Rc+
6
Green
Tx-
2
Rc-
5. Once the cable connections are made, open Crestron Toolbox and click
Tools | Manage Address book
to display the “Address Book” window.
6. Select the touchpanel from the address book or click
Add Entry
and type a
new name for the new device, such as
TPS
.
7. Click
TCP
as the connection type. Enter the IP address or hostname of the
touchpanel and click
OK
.
“Address Book” Window – TCP/IP Setup
8. Click
Tools | System Info
to display the “System Info” window. From the
pull-down menu, select the entry created in step 7.
If the touchpanel is to communicate with a control system over TCP/IP, an IP table
must be created on the touchpanel to identify the control system(s) it will
communicate with over TCP/IP.
Use the following instructions to create the IP table.
1. Select
Functions
| IP Table Setup
from the Toolbox menu bar.
¥
Wall Mount Touchpanels: TPS-12G/15G-QM-L
Operations Guide – DOC. 6356
50
Содержание Isys TPS-12G-QM-L
Страница 1: ...Crestron Isys TPS 12G 15G QM L Wall Mount Touchpanels Operations Guide...
Страница 4: ......