Crestron Isys i/O TPMC-15-CH-L Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 82

Crestron Isys i/O TPMC-15-CH-L Скачать руководство пользователя страница 28

Touchpanel Media Centers

Crestron Isys i/O

™

TPMC-15/17-L Series

For pin assignment information, refer to “QM (QM-L versions only)” on page 18.
Refer to page 22 for additional QuickMedia network wiring information.

Identity Code

All equipment and user interfaces within the network require a unique identity code
(Net ID). These codes are two-digit hexadecimal numbers ranging from 03 to FE.
Refer to “Cresnet” on page 28 for instructions on setting the unit's Net ID. The Net
ID of each unit must match an ID code specified in the SIMPL Windows program.
Refer to the latest version of the Crestron Isys i/O™ TPMC-15 & TPMC-17 Series
Programming Guide (Doc. 6350) for details of the SIMPL Windows procedure.

Configuring the Touchpanel

NOTE:

The only connection required to configure the touchpanel is power. Refer to

“Hardware Hookup” on page 47 for details.

The TPMC-15 and TPMC-17 are configured from the SETUP MENU.

NOTE:

If no project has been loaded, or if an invalid project has been loaded, the

touchpanel displays an error message and defaults to the SETUP MENU screen.

If a project is running, the SETUP MENU can be accessed using one of two
methods:

Via USB Keyboard

1. Attach a USB keyboard as shown in “Hardware Hookup” on page

2. Open the “Validate User Account Info” window (shown below) by

pressing

Ctrl+Alt+Shift

on the keyboard.

“Validate User Account Info” Window

3. Enter the user account

tpmcadmin

, and the password

tpmcadmin

and click

Validate

.

NOTE:

The password is case sensitive. After logging in, the

password can be changed from the “Security” window. Refer to
page 26 for more information.

24

•

Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17-L Series

Operations Guide - DOC. 6354

«
...
26
27
28
29
30
...
»

Содержание Isys i/O TPMC-15-CH-L



















































































Отзывы:

Нет отзывов