Crestron HD-MD-400-C-E, Дополнительное руководство

Страница: 33 / 40

Supplemental Guide – DOC. 7797D DM Lite HD(I)-MD Auto-Switchers and Extenders
•
29
Configure Audio Only Mode
NOTE: Audio Only Mode is only applicable to the VGA input on the transmitter of an
HD-MD-400-C-E, HD-MD-300-C-E, and HDI-MD-400-C-2G-E.
If Audio Only is enabled on the Inputs page for the VGA input, configure Audio Only
Mode to display a black or blue frame on the output. The default setting is Black.
Device Page – Audio Only Mode
Save or Load a Configuration File
A configuration file (*.xml) can be generated using the settings currently configured on a
switcher. The file can then be saved to the local hard drive of a PC. A configuration file
can also be loaded to a switcher.
Save or load a configuration file in the Save/Load Configuration section of the Device
page.
Device Page - Save/Load Configuration
To save or load a configuration file, refer to "Save a Configuration File" or "Load a
Configuration File” on the following page.
Save a Configuration File
In the Save/Load Configuration section, do the following to save a configuration file:
1. Click Save.
An HD-RX-201-C-E.xml file is generated containing the settings currently
configured on the switcher. In addition, an XML Edit dialog box opens.
2. Click Save to save the HD-RX-201-C-E.xml file. The file is downloaded to the
Downloads folder of the PC.