Crestron GLS-EM-MCU, Руководство по эксплуатации, Страница: 8 / 24

Crestron Green Light
®
Power Meter Control Unit Crestron GLS-EM-MCU
4 • Crestron Green Light
®
Power Meter Control Unit: GLS-EM-MCU Operations Guide – DOC. 7294B
Specifications
Specifications for the GLS-EM-MCU are listed in the following table.
GLS-EM-MCU Specifications
SPECIFICATION DETAILS
Wired Communications
Ethernet
Branch Circuit Monitor Bus
10/100 Mbps; auto-switching; auto-
negotiating; auto-discovery; full/half duplex;
industry-standard TCP/IP stack; UDP/IP;
CIP; DHCP; IPv4; installer setup via
Crestron Toolbox™
Addressable data bus for connecting MCU
to CTI units; transfers value provided by CT
connected to CTI
Operating Voltage 100 to 347 Volts AC, 50/60Hz
Minimum 2-Series Control
System Update File
1,2
Version 4.003.0007 or later
Enclosure Galvanized steel with powder coat finish
Environmental
Installation Location Indoor use only
Temperature 32º to 104º F (0º to 40º C)
Humidity 0% to 95% RH (non-condensing)
Heat Dissipation 10 BTU/Hr
Dimensions
Height 10 1/4 in (260 mm)
Width 10 3/16 in (260 mm)
Depth 3 7/16 in (88 mm)
Weight 64 oz (1.8 kg)
1. The latest software versions can be obtained from the Crestron Web site. Refer to the NOTE
following these footnotes.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the Web site are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIPs) only. New users
must register to obtain access to certain areas of the site (including the FTP site).