Reconfigure the Retractors for Horizontal
Operation
The retractors are shipped configured for vertical orientation. If the
vertical space beneath the table is limited, the retractors may be
reconfigured for horizontal orientation by following the steps below.
1. Remove and retain the four screws, two screws on each side, that
secure the retractor neck to the retractor arm.
2. Pivot the retractor neck so that the neck is perpendicular to the
retractor arm.
3. Using the four screws removed from step 1, secure the retractor neck.
5
CBLR2 Series
Quick Start
FlipTop™ Cable Retractors
