Crestron FlipTop CBLR2 Series Скачать руководство пользователя страница 1

Страница: 1 / 10

The Crestron®

FlipTop™ Cable Retractors offer a refined

solution for Crestron FlipTop cable management systems. Each cable
pulls out smoothly to a length of 3 ft (0.9 m) and latches in position. A
second pull of the cable releases the latch and retracts the cable back into
the compartment.

In the Box

CBLR2-HD, CBLR2-MDP-DP, CBLR2-VGA, CBLR2-AUDIO,
CBLR2-USB, CBLR2-CAT5E, or CBLR2-VGA-AUDIO

Check the Accessories

Ensure that the mounting bracket received is appropriate for the FlipTop
being modified

NOTE:

The following table excludes FlipTop 600 Series models.

Mounting Bracket

Assemblies

FlipTop Models

CBLRA-BRKT-3-FT

3-Position
Domestic Model

FT-PWR-D, QM-FTCC, QM-FTCC-NB, QM-FTDC,
QM-FTDC-NB, and QM-FTMC

CBLRA-BRKT-4-FT

4-Position
Domestic Model

C2N-FTR-TPS4, C2N-FTR-TPS4-U, FT-PWR-D-LG,
QM-FTCC-NB, and QM-FTCC-TPS4

CBLRAI-BRKT-4-FT

4-Position
International Model

FTI-PWR-D, QMI-FTCC, QMI-FTCSC, QMI-FTDC, and
QMI-FTMC

Two spacer insert models,

CBLRA-INSERT-BLANK

and

CBLRA-INSERT-2WIRE

, may be used to fill unpopulated retractor slots in

any of the FlipTops listed above.

CBLR2 Series

Quick Start

FlipTop™ Cable Retractors

Содержание FlipTop CBLR2 Series











Результаты поиска

Содержание FlipTop CBLR2 Series

Отзывы:

Похожие инструкции для FlipTop CBLR2 Series

Бренды по названию

Популярные бренды

Crestron FlipTop CBLR2 Series, Быстрый старт

Результаты поиска

Содержание FlipTop CBLR2 Series

Отзывы:

Похожие инструкции для FlipTop CBLR2 Series

Бренды по названию

Популярные бренды