Crestron DM-RMC-SCALER-C, Руководство по эксплуатации и установке

Страница: 22 / 36

DigitalMedia 8G+ Receiver Crestron DM-RMC-SCALER-C
18 • DigitalMedia 8G+ Receiver: DM-RMC-SCALER-C Operations & Installation Guide – DOC. 7231B
Hardware Connections for the DM-RMC-SCALER-C (Bottom Panel View)
HDMI OUT:
Digital Video/
Audio Output
USB HID:
From USB
HID-Compliant
Device
COM:
To RS-232
Device
IR:
To IR
Controllable
Device
Hardware Connections for the DM-RMC-SCALER-C (Rear Panel View)
Ground
DM IN:
From DM Switcher,
Transmitter, or Other
DM Device or to
HDBaseT Device
NOTE:
Ensure that the unit is properly grounded by connecting the chassis ground
lug to an earth ground (building steel).
NOTE:
For DM 8G+ or HDBaseT wiring, use Crestron DM-CBL-8G DigitalMedia
8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D
DigitalMedia D cable, or third-party CAT5e (or better) UTP or STP
.
Maximum wire
length for DM 8G+ is 330 feet (100 meters) between devices. Shielded cable and
connectors are recommended to safeguard against unpredictable environmental
electrical noise which may impact performance at resolutions above 1080p. For
complete system design guidelines, refer to the Crestron DigitalMedia Design Guide
(Doc. 4546). DM 8G+ is compatible with HDBaseT Alliance specifications for
connecting to HDBaseT compliant equipment. All wire and cables sold separately.