The Crestron
is a network AV encoder that transmits up
to 1080p60 4:4:4 video over standard Gigabit Ethernet to a DM NVX®
decoder. The
is a network AV decoder that receives up to
1080p60 4:4:4 video from a DM NVX encoder.
The DM-NVX-E10 provides a single HDMI® input, and the DM-NVX-D10
provides a single HDMI output. Both devices feature secure web-based
control and management, an analog audio output, and copper LAN
connectivity with PoE (Power over Ethernet) support.
In the Box
1
DM-NVX-E10 or DM-NVX-D10
Additional Items
2
Connector, 3-Pin (2003575)
1
Connector, 2-Pin (2003574)
Install the Device
The DM-NVX-E10 and DM-NVX-D10 can be mounted onto a flat surface
or onto a rack rail.
Mounting onto a Flat Surface
Using four mounting screws (not included), mount the device onto a flat
surface such as a wall or the underside of a table. The screw diameter
should be no more than 6 mm. Be sure to use the mounting hardware
that is appropriate for the surface to which the device is being mounted.
NOTE:
Fan ventilation holes are provided on five sides of the device.
If the installation necessitates that another object be positioned flush
against the ventilation holes on one side of the device, leave a
minimum clearance of 2 inches of space on all other sides containing
ventilation holes.
Wall Mounting (DM-NVX-E10 Shown)
DM-NVX-E10 and DM-NVX-D10
Quick Start
DM NVX® 1080p60 4:4:4 Network AV Encoder and Decoder
1
