2-1/8 in
(55 mm)
11/16 in
(19 mm)
34-3/8 in
(873 mm)
10-7/8 in
(276 mm)
2-1/4 in
(58 mm)
Ground bus
5-7/8 in
(150 mm)
4-5/8 in
(118 mm)
(inside)
5-7/8 in
(150 mm)
5-7/8 in
(150 mm)
5-7/8 in
(150 mm)
5-7/8 in
(150 mm)
4-5/8 in
(118 mm)
(inside)
(2X) Ø 7/16 in
(Ø 12 mm)
Mounting
holes
Metal, DIN rail,
1-3/8 in (35 mm)
wide x
5/16 in (7.5 mm)
high x
13-1/2 in (342 mm)
long (6x)
(2X) Ø 5/16 in
(Ø 8 mm)
Mounting
holes
(2X) Ø 5/8 in
(Ø 16 mm)
Crestron Electronics, Inc.
Installation Guide - DOC. 7192B
15 Volvo Drive, Rockleigh, NJ 07647
(2030929)
Tel: 888.CRESTRON
06.18
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.
Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics,
Inc. in the United States and/or other countries. UL and the UL logo are either trademarks or registered
trademarks of Underwriters Laboratories, Inc. in the United States and/or other countries. Other
trademarks, registered trademarks, and trade names may be used in this document to refer to either the
entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in
the marks and names of others. Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2018 Crestron Electronics, Inc.
~2-1/8 in
(55 mm)
~18-15/16 in
(482 mm)
1-3/4 in
(45 mm)
~10-7/8 in
(276 mm)
23-1/2 in
(597 mm)
(2X) Ø 7/16 in
(Ø 12 mm)
Mounting holes
for up to 1/4 in
screws
(2X) Ø 5/16 in (Ø 8 mm)
Mounting holes for
up to 1/4 in screws
(2X) Ø 5/8 in
(Ø 16 mm)
~11/16 in
(18 mm)
(4X)
Mounting
holes for
MMP panel
~15-3/8 in
(390 mm)
~15/16 in
(24 mm)
~3/8 in
(9 mm)
(4X) Ø 7/16 in
(Ø 11 mm)
(4X)
~5/16 in
(9 mm)
~11-13/16 in
(300 mm)
~2-15/16 in
(75 mm)
~11-13/16 in
(300 mm)
~20-1/4 in
(515 mm)
~13-11/16 in
(347 mm)
~1-9/16 in
(41 mm)
(4X) Ø 3/16 in
(Ø 6 mm)
Mounting holes
for #10 screws
~2-1/8 in
(55 mm)
~34-3/8 in
(873 mm)
1-3/4 in
(45 mm)
~10-7/8 in
(276 mm)
(2X) Ø 5/16 in (Ø 8 mm)
Mounting holes for
up to 1/4 in screws
(2X) Ø 5/8 in
(Ø 16 mm)
~38-7/8 in
(988 mm)
~11/16 in
(18 mm)
(6X)
Mounting
holes for
MMP panel
(2X) Ø 7/16 in
(Ø 12 mm)
Mounting holes
for up to 1/4 in
screws
~15-3/8 in
(390 mm)
~15/16 in
(24 mm)
~3/8 in
(9 mm)
~36-1/8 in
(918 mm)
~13-11/16 in
(347 mm)
~1-9/16 in
(41 mm)
(6X) Ø 7/16 in
(Ø 11 mm)
~11-13/16 in
(300 mm)
(6X)
~5/16 in
(9 mm)
~2-3/8 in
(60 mm)
~11-13/16 in
(300 mm)
(6X) Ø 3/16 in
(Ø 6 mm)
Mounting holes
for #10 screws
~17-11/16 in
(450 mm)
Internal Dimensions of DIN-EN-6X18 Rail Enclosures
Internal Dimensions of DIN-EN-3X18-MMOE (Rough-In Enclosure)
NOTE:
The external dimensions of the DIN-EN-3X18-MMOE are identical to the
DIN-EN-3X18 (refer to other side of this sheet).
Dimensions of DIN-EN-3X18-MMP (Lay-In Panel)
Internal Dimensions of DIN-EN-6X18-MMOE (Rough-In Enclosure)
NOTE:
The external dimensions of the DIN-EN-6X18-MMOE are identical to the
DIN-EN-6X18 (refer to other side of this sheet).
Dimensions of DIN-EN-6X18-MMP (Lay-In Panel)
This product is Listed to applicable UL
®
Standards and requirements tested by
Underwriters Laboratories Inc.
Ce produit est homologué selon les normes et les exigences UL applicables par
Underwriters Laboratories Inc.
The product warranty can be found at
www.crestron.com/warranty
.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents
.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource
.
