Crestron DIN-1DIMU4, Руководство по эксплуатации и установке, Страница: 13 / 36

Crestron DIN-1DIMU4 DIN Rail Universal Dimmer
Connectors, Controls & Indicators (Continued)
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
9 AUTO (1 – 4) LED (4) Red LEDs, illuminate when
a corresponding channel is set
to auto-detect the load type
10 NON-DIM (1 – 4) LED (4) Red LEDs, illuminate when
a corresponding channel is
operating in non-dim mode
11 Channel Mode Select
(1 – 4)
(4) Recessed miniature push
buttons, used to select each
channel’s operating mode
For more information, refer to
“Operation” which starts on
page 23.
12 LOADS (1 – 4)
(LEDs and Buttons)
(4) Red LEDs and (4) miniature
push buttons for status
indication and local control of
each channel
13 NET (2) 4-pin 3.5 mm detachable
terminal blocks, paralleled
Cresnet slave port
Maximum wire size: 1.5 mm
2
(16 AWG)
24 : Power (24 Volts DC)
Y : Data
Z : Data
G : Ground
(Continued on following page)
Operations & Installation Guide – DOC. 6668D DIN Rail Universal Dimmer: DIN-1DIMU4
•
9