Crestron Electronics, Inc.
Installation Guide - DOC. 7692B
15 Volvo Drive, Rockleigh, NJ 07647
(2041631)
Tel: 888.CRESTRON
03.19
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.
The DMC Fiber Series are class 1 laser products. They comply with safety regulations of IEC-60825-1,
FDA 21 CFR 1040.11 and FDA 21 CFR 1040.10.
WARNING
: Visible and invisible laser radiation when open. Avoid direct exposure to beam.
NOTE
: Plug the included dust cap into the optical transceiver when the fiber optic cable is unplugged.
The product warranty can be found at
www.crestron.com/legal/sales-terms-conditions-warranties
.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents
.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/legal/open-source-software
.
Crestron, the Crestron logo, and DigitalMedia are either trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and/or other countries. UL and the UL logo are either
trademarks or registered trademarks of Underwriters Laboratories, Inc. in the United States and/or
other countries. Other trademarks, registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Crestron
disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for
errors in typography or photography.
©2019 Crestron Electronics, Inc.
Original Instructions:
The U.S. English version of this document is the original instructions. All other
languages are a translation of the original instructions.
As of the date of manufacture, the DMC Series cards have been tested and found to comply with
specifications for CE marking.
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION:
Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Industry Canada (IC) Compliance Statement
CAN ICES-3(A)/NMB-3(A)
This product is Listed to applicable UL
®
Standards and requirements tested by Underwriters
Laboratories Inc.
Ce produit est homologué selon les normes et les exigences UL applicables par Underwriters
Laboratories Inc.
