Crestron DigitalMedia DM-MD64X64, Руководство по эксплуатации и установке, Страница: 19 / 60

Crestron DM-MD64X64 64 x 64 DigitalMedia Switcher
Operations & Installation Guide – DOC. 7318A DigitalMedia Switcher: DM-MD64X64

15
Connectors, Controls & Indicators
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
1 Touch Screen 15 inch (381 mm) diagonal TFT active
matrix color LCD, 15:9 WXGA,
1280 x 768 pixels, resistive touch
membrane, amplified speakers;
Provides signal routing, video input
preview, video and audio signal
information, system diagnostics, setup
and configuration
2 Touch Screen
Hard Key
Not used
3 COMPUTER
Pin 4
Pin 1
Pin 3
Pin 2
(1) USB Type B female;
USB computer console port
(6 foot [~1.8 meter] cable included)
PIN DESCRIPTION
1 +5 VDC
2 Data -
3 Data +
4 Ground
4 POWER SUPPLIES
LEDs 1, 2
(2) Green LEDs, indicate when each
corresponding power supply is
functioning
5 POWER SUPPLIES
FAULT LED
(1) Red flashing LED, indicates a fault
with either power supply
6 HW-R Button (1) Recessed miniature push button for
hardware reset, reboots the switcher
7 INPUT
1-8
(8) DM switcher input blade slots;
Each slot accepts (1) DMB-I series input
blade. Refer to “Input Blades” starting on
page 32 in the Appendix for additional
information.
8 OUTPUT
1-8
(8) DM switcher output blade slots;
Each slot accepts (1) DMB-O series
output blade. Refer to “Output Blades”
starting on page 42 in the Appendix for
additional information.
9 CPU Accepts (1) DMB-CPU-64 CPU blade
(included). Refer to “CPU Blade” starting
on page 28 in the Appendix for additional
information.
10 FANTRAY (1) Fan tray, hot-swappable, Crestron
model DM-MDA-64-FANTRAY
11 100-127V ~ 50/60Hz 16A,
200-240V ~ 50/60Hz 8A
(2) IEC 60320 C-20 main power inlets;
Mate with removable power cords
(included)*
(Continued on following page)