6
•
DM-RMC-4KZ-100-C: 4K DigitalMedia 8G+ Receiver
Supplemental Guide – DOC. 8376A
SETUP: (Applicable only to a configuration in which a DigitalMedia switcher is not
used) Red LED indicates that the SETUP button is pressed and times out
automatically;
Recessed push button for Ethernet setup
NOTE:
The default static IP address of the DM-RMC-4KZ-100-C is 192.168.1.250.
Ground ( ): 6-32 screw, chassis ground lug
HDMI OUT: HDMI Type A connector, female;
HDMI digital video/audio output (DVI compatible)
NOTES:
•
The HDMI OUT port requires an appropriate adapter or interface cable to
accommodate a DVI signal. CBL-HD-DVI interface cables are available
separately.
•
4K60 4:4:4 performance and HDR support require the use of HDMI cables and
couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30
4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth
of 10.2 Gbps may be used. Performance may be reduced when inserting multiple
cables and couplers inline.
HDMI OUT LED: Green LED, indicates that an HDMI signal is detected at the
HDMI output
DM IN: 8-pin RJ-45 female, shielded;
DM 8G+® input, HDBaseT standard compliant;
PoDM PD (powered device) port (HDBaseT PoE compatible);
Connects to the DM 8G+ output of a DM® switcher, transmitter, or other DM® device,
or to an HDBaseT device via CAT5e, Crestron DM-CBL-8G, or Crestron
DM-CBL-ULTRA cable;
Green LED indicates that a DM or HDBaseT link is established;
Solid amber LED indicates that HDCP video is detected;
Flashing amber LED indicates that non-HDCP video is detected.
NOTE:
In order to receive PoDM, the DM IN port requires connection to a
DigitalMedia switcher or other DM equipment that has a PoDM PSE (power sourcing
equipment) port. In order to receive HDBaseT PoE, the DM IN port requires
connection to equipment that has an HDBaseT PoE PSE port. Wiring that connects
to a PoDM or HDBaseT PoE PSE port is for intrabuilding use only.
24 VDC 0.75A MAX: 2.1 x 5.5 mm DC power connector;
24 VDC power input;
Power pack included
Power LED: Green LED, indicates that power is being applied via PoDM, HDBaseT
PoE, or the included power pack
Содержание DigitalMedia 8G+ DM-RMC-4KZ-100-C
Страница 4: ......
