Crestron CNXAO-8, Руководство по эксплуатации

Страница: 6 / 20

CNX Analog Output Expansion Card Crestron CNXAO-8
Leading Specifications
The table below provides a summary of leading specifications for the CNXAO-8.
Dimensions and weight are rounded to the nearest hundredth unit.
Leading Specifications of the CNXAO-8
DETAILS
Connectors (2) 5-pin Mini-Phoenix Type
Power Requirements 24VDC, network power; 24 Watts (max)
(8 Watts + 2 Watts per fully loaded output)
Voltage Span/Offset +/-12 VDC
Output Resolution 1024 levels (10 bit)
SIMPL™ Windows® Version 1.30.01 or later*
CNX Upgrade File Version 5.04.11X or later**
VisionTools™ Pro Version 1.21 or later*
Dimensions:
Height 0.98 in (2.49 cm)
Width 5.00 in (12.70 cm)
SPECIFICATIONS
* The latest software versions can be obtained from the Software Downloads page
(Simplwin and Touchpnl Libraries) of the Crestron website (
www.crestron.com) . New
users are required to register in order to obtain access to the FTP site.
** Filenames for CNX upgrades have a .upz extension and can be obtained from the
Software Downloads page (Opsys Library) of the Crestron website.
As of the date of manufacture, the unit has been tested and found to comply with
specifications for CE marking.
NOTE: This card complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) these devices may not cause harmful interference,
and (2) these devices must accept any interference received, including interference
that may cause undesired operation.
Setup
Power Up/Reset Voltage Adjustment
The setting of two 3-pin jumpers on the CNXAO-8 card determines whether the
card’s output voltage is equal to the lowest value of the assigned voltage span (0%)
or the midpoint of the voltage span (50%) when the system is powered up or reset.
Two jumpers (X1 and X2) are required to provide adjustment to two output groups
(A and B), respectively.
CAUTION: Besides setting the jumper, initialize values in the SIMPL Windows
program so that the device receiving the analog signal does not exhibit drastic
voltage swings upon start up or reset. Failure to do so may result in damage to the
device being controlled.
2
•
CNX Analog Output Expansion Card: CNXAO-8 Operations Guide - DOC. 8142