Crestron CNX-PVID8x3 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 48

Crestron CNX-PVID8x3 Скачать руководство пользователя страница 7

Crestron

CNX-PVID8x3

Professional Video Distribution Switch

Operations Guide - DOC. 8159A

Professional Video Distribution Switch: CNX-PVID8x3

•

3

hardware configuration chosen. Refer to "Hardware Configurations" on page 15 for
specific connection details.

CNX-PVID8x3 used without Crestron Room Solution Box

In this system, the CNX-PVID8x3 has an incredible amount of flexibility with
respect to making connections to all three types of video sources. For example, it is
possible to have a composite source connected to INPUT 1, level 1 and an S-video
source connected to INPUT 1, levels 2 and 3, simultaneously. However, the Crestron
SystemBuilder cannot be used for the programming portion of this kind of system.
All programming is done entirely in SIMPL Windows. Refer to "Programming with
SIMPL Windows" on page 24 for guidance with respect to SIMPL Windows.

Specifications

The following table provides a summary of specifications for the CNX-PVID8x3.

Specifications of the CNX-PVID8x3

SPECIFICATION DETAILS

Cresnet Power Usage

36 Watts (1.25 Amp @ 24 VDC)

Default Net ID

41

Control System Update Files

1, 2, 3

2-Series Control System
CNMSX-AV/PRO
CNRACKX/-DP
CEN/CN-TVAV
ST-CP

Version 2.004.CUZ or later
Version 5.14.02X.UPZ or later
Version 5.14.02W.UPZ or later
Version 5.12.63V.UPZ or later
Version 4.02.4S.UPZ or later

CNX-PVID8x3 Firmware

4

PVID_16.vx.xxx.upg or later
PVID_16.s19 or later

Rack space required

3U high; 1U wide

Video bandwidth

100 MHz

Crosstalk

> -60 dB

Environmental temperature range

41° to 104°F (5° to 40°C)

Humidity

10% to 90% RH (non-condensing)

Dimensions
(with feet)
(without feet)
(without mounting ears)

Height: 5.31 in (13.49 cm)

5.21 in (13.24 cm)

Width:

17.16 in (43.59 cm)

Depth:

8.45 in (21.47 cm)

Weight

8.6 lb (3.87 kg)

1.

The latest versions can be obtained from the Crestron website. Refer to NOTE after last footnote.

2.

Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.

3.

Filenames for CNX and ST-CP update files have a UPZ extension. Files on the website may be .zip
or self-extracting .exe files containing the .cuz or .upz file. All can be obtained from the Downloads
section of the Crestron website. To avoid program problems, make sure you are using the update file
with the correct suffix letter (e.g., S, V, W, X)

4. In

DETAILS,

vx.xxx.x

represents a version number.

NOTE

: Crestron software and any files on the website are for Authorized Crestron

dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).

«
...
5
6
7
8
9
...
»

Содержание CNX-PVID8x3

















































Отзывы:

Нет отзывов