CRESTRON
CNWP
Wired Panels
R E M O T E C O N T R O L S Y S T E M S
2
DOC. 8008D
Specifications subject to change without notice.
LEADING SPECIFICATIONS:
Table 2 provides a summary of leading specifications for wired panels. Dimensions and weight are
approximations rounded to the nearest tenth unit.
Table 2. Leading Specifications
SPECIFICATION
DETAILS
CRESNET II Workshop
Version 3.40 or later
CRESNET II Operating System
SR30160.OPS or later
Cresnet Power Factor (CNWP-32)
(CNWP-64)
(CNWPBG2-32)
(CNWPBG2-64)
(CNWP-32B)
(CNWPBG2-32B)
3.0 Watts
5.5 Watts
4.0 Watts
6.5 Watts
3.0 Watts
4.0 Watts
Dimensions & Weight:
Permit 4.0 inch (10.2 cm) depth for all
lectern-mounted units. Consult factory for
lectern cut-out information.
CNWP-32
CNWP-64
CNWPBG2-32
CNWPBG2-64
CNWP-32B
CNWPBG2-32B
Height:
5.5 in (14.0 cm)
Width:
5.8 in (14.6 cm)
Height:
5.5 in (14.0 cm)
Width:
10.8 in (27.3 cm)
Height:
5.5 in (14.0 cm)
Width:
8.3 in (21.0 cm)
Height:
5.5 in (14.0 cm)
Width:
12.5 in (31.8 cm)
Height:
6.1 in (15.6 cm)
Width:
6.4 in (16.2 cm)
Height:
6.1 in (15.6 cm)
Width:
8.9 in (22.5 cm)
INSTALLATION/SETUP:
Identity Code
Each unique panel or component on the CRESNET II network requires the setting of an identity code (ID
CODE). ID CODES are two-digit hexadecimal numbers, from 03 to FE.
The ID CODE of the panel should be set to match the ID CODE specified in the NET.ID statement of the
CRESNET II SIMPL-C program referencing the panel (refer to SYNTAX section). To set an ID CODE,
disconnect power and remove the back of the panel. Accessible through the opening are two miniature
