Crestron
CNPWS-75
System Power Supply
Operations Guide - DOC. 8091A
System Power Supply: CNPWS-75
••
5
CNPWS-75 Hardware Hookup
NETWORK
UNIT
NETWORK DATA LINK
TO ADDITIONAL
EXPANSION CNPWS-75
CNPWS-75
NC
DAISY CHAIN METHOD
NETWORK
UNIT
NETWORK
UNIT
NC
CNPWS-75
POWER EXPANSION
(NETWORK DATA
LINK TO EXPANSION
CNPWS-75)
HOME RUN METHOD
CONTROL
SYSTEM
NOTE:
Never connect multiple CNPWS-75s in parallel.
NOTE:
Always disconnect AC power to the CNPWS-75 supplying power to a
Cresnet system before connecting a network unit to that system or installing a card in
the control system.
Hookup Procedure
1.
Connect each network unit to the appropriate network connector.
2.
Connect AC power to the CNPWS-75.
3.
If a PC (running SIMPL Windows) is available, connect the PC to the
Cresnet system via the computer port on the control system.
4.
From SIMPL Windows, select
Tools | Viewport
to open the Viewport.
5.
Select
Diagnostics | Report Network Devices
(alternatively
F4
) to
verify that all network units are properly connected to the Cresnet
system.
