CAEN Mounting Kit
Crestron
CAEN-MK
Installation
Assembly
Tools/hardware required
11/32” Wrench or nut driver
8-32 Nuts (quantity four, supplied)
Complete the following assembly procedure in the order provided (refer to
illustration below).
1. Holding the device facing you, position the bracket-mounting studs on
metal bracket MTBK02857-1 in the device’s mounting holes as shown
in the following diagram.
2. Slide the metal bracket through the device’s mounting holes.
3. Using an 11/32” wrench, secure the two nuts (supplied) to the
mounting studs on the metal bracket.
4. Repeat for the other bracket.
Assembly View
METAL BRACKET
(MTBK02857-1)
METAL BRACKET
(MTBK02856-1)
NUTS, KEPS
8-32
2
•
CAEN Mounting Kit: CAEN-MK
Installation Guide - DOC. 6130
