Crestron
C2IR-8
2-Series IR/Serial Output Expansion Card
2-Series IR/Serial Output
Expansion Card: C2IR-8
Description
Functional Description
The C2IR-8 Infrared & Serial Output Expansion Card provides eight ports for
infrared (IR), ASCII, or other serial communication and control. IR output is rated
up to 1.2 MHz, at data rates up to 115K. Serial protocols include RS-232. This new
generation card provides consistent IR data and generates output from all eight ports
simultaneously. The Crestron IRP2 Cresnet Infrared Emitter probe is designed to
interface with the C2IR-8 expansion card output connectors.
NOTE:
RS-232 levels provide a 0 – 5V range, which may not be compatible with
all devices.
Physical Description
The C2IR-8 is a circuit board fastened to an aluminum faceplate. The card is
manufactured to easily fit into an unoccupied slot in a Crestron 2-Series Control
System.
NOTE
: This card is compatible with 2-Series Control Systems only.
The faceplate, shown below, contains two male, 8-pin connectors; each with 4 pairs
of output pins labeled S and G (signal and ground). The pin pairs are labeled A
through D and E through H. Two supplied 8-position connectors can be wired and
attached to the faceplate connectors.
C2IR-8 Faceplate
C2IR-8 INFRARED - SERIAL OUTPUT
S
S
S
S
G
G
G
G
E
F
G
H
S
S
S
S
G
G
G
G
A
B
C
D
Operations & Installation Guide – DOC. 8172
2-Series IR/Serial Output Expansion Card: C2IR-8
•
1
