Crestron C2ENET-1 Скачать руководство пользователя страница 26

2-Series Ethernet Interface Expansion Cards 

Crestron 

C2ENET-1/-2 

If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) 

days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from 
Crestron of its authorized agent. 

Without prejudice to any other rights, Crestron may terminate this Agreement immediately upon notice if you fail to comply with 

the terms and conditions of this Agreement. In such event, you must destroy all copies of the Software and all of its component parts. 

PROPRIETARY RIGHTS 

Copyright. All title and copyrights in and to the Software (including, without limitation, any images, photographs, animations, 

video, audio, music, text, and “applets” incorporated into the Software), the accompanying media and printed materials, and any copies of the 
Software are owned by Crestron or its suppliers. The Software is protected by copyright laws and international treaty provisions. Therefore, 
you must treat the Software like any other copyrighted material, subject to the provisions of this Agreement. 

Submissions. Should you decide to transmit to Crestron’s website by any means or by any media any materials or other information 

(including, without limitation, ideas, concepts or techniques for new or improved services and products), whether as information, feedback, 
data, questions, comments, suggestions or the like, you agree such submissions are unrestricted and shall be deemed non-confidential and you 
automatically grant Crestron and its assigns a non-exclusive, royalty-tree, worldwide, perpetual, irrevocable license, with the right to 
sublicense, to use, copy, transmit, distribute, create derivative works of, display and perform the same. 

Trademarks. CRESTRON and the Swirl Logo are registered trademarks of Crestron Electronics, Inc. You shall not remove or 

conceal any trademark or proprietary notice of Crestron from the Software including any back-up copy. 

GOVERNING LAW 

This Agreement shall be governed by the laws of the State of New Jersey, without regard to conflicts of laws principles. Any 

disputes between the parties to the Agreement shall be brought in the state courts in Bergen County, New Jersey or the federal courts located 
in the District of New Jersey. The United Nations Convention on Contracts for the International Sale of Goods, shall not apply to this 
Agreement. 

CRESTRON LIMITED WARRANTY 

CRESTRON warrants that:  (a) the Software will perform substantially in accordance with the published specifications for a period 

of ninety (90) days from the date of receipt, and (b) that any hardware accompanying the Software will be subject to its own limited warranty 
as stated in its accompanying written material. Crestron shall, at its option, repair or replace or refund the license fee for any Software found 
defective by Crestron if notified by you within the warranty period. The foregoing remedy shall be your exclusive remedy for any claim or 
loss arising from the Software. 

CRESTRON shall not be liable to honor warranty terms if the product has been used in any application other than that for which it 

was intended, or if it as been subjected to misuse, accidental damage, modification, or improper installation procedures. Furthermore, this 
warranty does not cover any product that has had the serial number or license code altered, defaced, improperly obtained, or removed. 

Notwithstanding any agreement to maintain or correct errors or defects Crestron, shall have no obligation to service or correct any 

error or defect that is not reproducible by Crestron or is deemed in Crestron’s reasonable discretion to have resulted from (1) accident; unusual 
stress; neglect; misuse; failure of electric power, operation of the Software with other media not meeting or not maintained in accordance with 
the manufacturer’s specifications; or causes other than ordinary use; (2) improper installation by anyone other than Crestron or its authorized 
agents of the Software that deviates from any operating procedures established by Crestron in the material and files provided to You by 
Crestron or its authorized agent; (3) use of the Software on unauthorized hardware; or (4) modification of, alteration of, or additions to the 
Software undertaken by persons other than Crestron or Crestron’s authorized agents. 

ANY LIABILITY OF CRESTRON FOR A DEFECTIVE COPY OF THE SOFTWARE WILL BE LIMITED 

EXCLUSIVELY TO REPAIR OR REPLACEMENT OF YOUR COPY OF THE SOFTWARE WITH ANOTHER COPY OR 
REFUND OF THE INITIAL LICENSE FEE CRESTRON RECEIVED FROM YOU FOR THE DEFECTIVE COPY OF THE 
PRODUCT. THIS WARRANTY SHALL BE THE SOLE AND EXCLUSIVE REMEDY TO YOU. IN NO EVENT SHALL 
CRESTRON BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND 
(PROPERTY OR ECONOMIC DAMAGES INCLUSIVE), EVEN IF A CRESTRON REPRESENTATIVE HAS BEEN ADVISED 
OF THE POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY THIRD PARTY. CRESTRON MAKES NO 
WARRANTIES, EXPRESS OR IMPLIED, AS TO TITLE OR INFRINGEMENT OF THIRD-PARTY RIGHTS, 
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY OTHER WARRANTIES, NOR 
AUTHORIZES ANY OTHER PARTY TO OFFER ANY WARRANTIES, INCLUDING WARRANTIES OF 
MERCHANTABILITY FOR THIS PRODUCT. THIS WARRANTY STATEMENT SUPERSEDES ALL PREVIOUS 
WARRANTIES. 

22  

  2-Series Ethernet Interface Expansion Cards: C2ENET-1 & C2ENET-2 

Operations & Installation Guide – DOC. 5962B 

Содержание C2ENET-1

































Отзывы: