Partner: BiAmp
Model: AudiaFlex & Nexia
Device Type: DSP
CRESTRON HARDWARE REQUIRED:
C2-COM, C2I-*-COM*, C2ENET-1/2, C2I-*ENET-*
SETUP OF CRESTRON HARDWARE:
RS232
Baud: 38400
Parity: N
Data Bits: 8
Stop Bits: 1
TCP/IP
Port 23 (Telnet)
VENDOR FIRMWARE:
4.560
CONTROL:
Volume_Up/Down
D Press and hold to adjust the volume level.
New_Volume_Level
A
Analog value of volume level. This is the signed dB level to set the volume level to. Will be
sent when the Send_New_Level input is pulsed. This will allow preset values to be sent to
the BiAmp. Valid range is Volume_Upper_Limit to Volume_Lower_Limit. Default range is -
100 to +12.
NOTE: THIS INPUT IS NOT DESIGNED TO BE USED WITH A RAMP SYMBOL IN SIMPL
WINDOWS. IT IS ONLY DESIGNED TO BE USED FOR PRESET LEVELS.
Send_New_Level
D Pulse to send the volume entered in the New_Volume_Level input. This will allow preset
values to be sent to the BiAmp.
Poll_Level
D Pulse to poll for the current value.
From_Processor
S
Serial data signal to be routed from one of the To_Modules[*] outputs on the BiAmp
Aud Nexia Command Processor Serial v7.5.1 module or the BiAmp Aud
Nexia Command Processor IP v7.5.1 module.