Crestron BB-5000, Руководство по установке

Страница: 6 / 16

Back Box Crestron BB-5000
Installation
There are at least two different methods of installing the BB-5000. The construction
method is initiated during the construction process. Use this method to wall mount
either a Crestron Series 4500 or Series 5000 Lectern/Wall Mount Touchpanel to a
wall stud. Installation begins at a time when the rooms in which the panel is to be
installed are framed and the gypsum board has not been hung. The post-construction
method is preferred for wall mounting when the rooms are complete and the gypsum
board has already been hung. The post-construction method is also desirable when
lectern mounting the panel.
Construction Method
The only equipment and tools required are three #6 mounting screws (or equivalent),
a drill with adjustable torque, a #2 Phillips tip bit, a 5/16” drill bit, and a #20 drill bit.
Complete the following installation procedure in the order provided.
1. Remove necessary knockout(s) from metal electrical box.
2. Use six pan head screws (1/2” length), supplied, to loosely secure two
metal brackets to the back box.
Attaching Two Metal Brackets to the Back Box
PAN
HEAD
SCREWS
METAL
BRACKETS
3. Position the metal electrical box to the stud. If
5
/
8
" gypsum board is
used, be sure that ½" of the box protrudes from the stud as illustrated in
the metal electrical box cut away shown after this step.
2
•
Back Box: BB-5000 Installation Guide - DOC. 5827A