Crestron
BB-1550CW
Wall Mount Back Box for STX-1550CW
Installation Guide - DOC. 5848
Wall Mount Back Box for STX-1550CW: BB-1550CW
••
7
9.
Orient the back box enclosure as shown below (notch for manual
unlatching
upwards
) and remove an appropriate knockout for the
Cresnet wiring.
Back Box Enclosure Orientation
NOTCH
FOR MANUAL
UNLATCH TAB
ACCESS
REMOVED
KNOCKOUT
10.
As shown below, loosely install
four
pan head screws with washers
through the inside of the enclosure into the support bracket holes.
Tighten screws only
finger-tight
so that final adjustments may be
made during step 14 of this procedure.
Loosely Install Support Bracket
11.
Position the back box enclosure near the cut-out area and feed the
Cresnet wiring through the enclosure knockout.
