Crestron AM-100 AirMedia, Руководство по эксплуатации

Страница: 27 / 44

Crestron AM-100 AirMedia Presentation Gateway
Operations Guide – DOC. 7463B AirMedia Presentation Gateway: AM-100 • 23
Host Name and Domain Name
Use a host name and domain name as an alternative to IP addressing
when connecting client computers to the AM-100.
NOTE: When specifying a host name, Crestron recommends using a
host name that is less than 15 characters.
NOTE:
To use a host name, the AM-100’s
IP Setup
must be set to
Obtain an IP address automatically or if using a static IP address, the
domain name must be specified in the Domain Name field.
To use a host name, enter a host name (less than 15 characters) in the
Host Name
field.
A domain name can also be entered in the
Domain Name
field.
To apply any changes, click Apply . To cancel, click Cancel .
IP Setup
In the IP Setup section, the IP address, subnet mask, default gateway and
DNS server of the AM-100 can be set. The settings can be set manually
or obtained from a DHCP server.
To use a DHCP server to provide the IP address, subnet mask, default
gateway, and DNS server, select Obtain an IP address automatically .
Otherwise, select Use the following IP address and enter the Ethernet
parameters.
To apply any changes, click
Apply . To cancel, click Cancel .
Crestron Control System
The Crestron Control System section specifies the control system that
controls the AM-100.
•
IP Address or Hostname
— Enter the IP Address or host name of
the Crestron control system that controls the AM-100 and click
Apply.
• IP ID — Enter the IP ID that identifies the AM-100 in the control
system’s program and click
Apply
.
•
Communication Status
— Indicates the status of the
communication link between the control system and the AM-100.
To apply any changes, click
Apply
. To cancel, click
Cancel
.