Crestron Adagio ATC-AMFM2, Руководство по эксплуатации и установке

Страница: 10 / 20

Dual AM/FM Tuner Card Crestron Adagio™ ATC-AMFM2
Setup
This section contains hardware installation and setup instructions for the
ATC-AMFM2.
Required Tools/Hardware
1. Small flat bladed screwdriver
2. Grounding
strap (encouraged)
Installation
CAUTION: The ATC-AMFM2 and the Adagio Entertainment System contain
electro-static discharge (ESD) sensitive devices. Crestron encourages you to wear a
grounding strap to avoid damaging the card and/or the host system.
When inserting a card into the Adagio Entertainment System you may need to move
other source connections if designated connectors are occupied by other sources. For
programming purposes, slots and source connections are matched according to the
following table:
Slot 1 Slot 2 Slot 3
Source
Connections
1&2 3&4 Refer to
note below.
CAUTION: Do not connect external sources to SOURCES connectors used by tuner
cards.
CAUTION: Be certain to insert tuner card before applying power to the Adagio
Entertainment System
.
NOTE: If the user intends to use the out-of-the-box functionality, do not to use
Slot 3 for tuner cards; otherwise, Slot 3 uses source connections 5 and 6.
Begin the card insertion procedure with these steps:
1. Disconnect power from the Adagio Entertainment System.
2. Remove the slotted screws securing any cover plate that may be
fastened to the slot you intend to use then set the screws and the cover
plate aside.
3. Unpack the ATC-AMFM2 card.
4. As shown after this step, position the ATC-AMFM2 card so that the
print on the faceplate is right side up and the side rails of the card slide
into the plastic slots mounted on left and right inside walls of the
Adagio Entertainment System.
6
•
Dual AM/FM Tuner Card: ATC-AMFM2 Operations & Installation Guide – DOC. 6461