Adagio
®
Balanced Video Receiver
Crestron
ABVR-1
Fine Tuning
The output of the ABVR-1 can be adjusted for optimum picture quality
using the
VIDEO ADJUST
control located at the top of the ABVR-1.
To adjust the output of the ABVR-1:
1.
Connect a video source with a “CH” video output to the
VIDEO
IN
port of the ABVR-1.
NOTE:
The video source must be able to display the “Streak” test
pattern (or similar pattern) shown below.
2.
Verify that the
VIDEO ADJUST
control on the ABVR-1 is turned
completely counterclockwise.
3.
If the picture shows streaks, turn the
VIDEO ADJUST
control
clockwise until picture quality improves.
10
•
Adagio
®
Balanced Video Receiver: ABVR-1
Operations Guide – DOC. 6792A
